How do you imagine metallic coating?

Metallic coating is an integral coating system in which the extremely durable coating is made from a metal sheet or panel. Most of the time, it is galvanized with a polymer protective coating, but depending on the project, other materials may also be used.

The main task is to cover the metal and protect it from rain, snow, wind and other atmospheric influences. If the basin function is performed correctly, then the system is often well designed.

One high-quality metal coating can be included:

• wearing a wooden or metal structure;
• thermal insulation, somewhat curved above the habitable room;
• vapor barrier layer from the weathered country;
• vapor permeable curved membrane;
• contraletvi and wearing a scara;
• metal curve coating;
• beat, ulami, chelni and border planks;
• paneling around the komini and pokrivni prozortsi;
• snow protection and ventilation elements;
• drainage system.

The quality of the final result depends not on the choice of metal itself, but also on the compatibility between all the components.

How do you base your predestination on metalite curves?

Nisko actually teglo

Metal curved coatings are significantly different from many traditional curved materials. Tova natovarvaneto vurhu naseshchata design and may be especially important when repairing the old city.

This does not in any way eliminate the need for constructive verification. When sagging, rotted or insufficiently strengthened elements are damaged, repairs are made and they are leveled.

Quick assembly

The use of sheet metal and pre-formed panels allows a significant area to be covered in a relatively short time. The actual period depends on the complexity of the curve, atmospheric conditions and attention to special details.

Resistance to atmospheric influences

They will elect correctly and montiran metalen kriv osiguriava reliable protection during the strong rain, snow and winter. Of particular importance is the quality of the fastening and correct execution of the joints around the beel, ulami, burgundy, komini and curvature of the prosortia.

Golyam selection from shape and color

Metal Curve Systems are offered in a variety of profiles, shapes, finishes and colors. It allows for a curved design that is consistent with both traditional architecture and modern minimalist architecture.

Suitable for new construction and renovation

The metal coating can be made in a new design or with a permanent replacement for the existing coating. In some cases, the metal coating is suitable and beyond the barriers, in which case it is necessary and limited to additional coverage.

Possibility for long-term goals

When determining the curvature of the system, the sheet can and should be adjusted to the required length on the slope. Tova paints the broya to make the connections and allows a clear vision.

We recycle the material

The metal can be recycled after the end for the operational period. Productivity is important when designing, and the choice of construction materials is dissuaded.

Main types of metal curves

The “metal curve” is expressed across several different systems. Those are distinguished by shape, beginning on the level, minimum allowable slope, preparation on the basis and architectural application.

Suitable type of metal, curved surface and selected design, inclination, length on the slope, foundation, climatic conditions and desired vision.

Metalen curvature with metal keremidi

Metalnite keremidi sedno from nay-recognize the decisions for the metal curvature on the house. The profile is similar to that of the traditional keremidi, but you leaf it with leki and curve it significantly over the area.

This coating is suitable for new gable and multi-slope roofs, as well as for repairs to existing buildings.

When selecting metal keremis, try and check:

• debelinata per stomanata;
• quantity of this for zinc coating;
• vidt and debelinate for polymer coating;
• guarantee the conditions;
• suitable profile for architecture;
• you need accessories and strips;
• Compatibility with snow-containing elements.

Metal keremidi tryabva yes badat montirani vurhu correctly sized skara. The distance between the two depends on the specific model and the size of the modular platform.

An incorrectly executed scara can lead to placement on the sheet, problems with the edge being secured and uneven.

Metalen curved with profiliran lamarin

Lamarin corrugated sheet is a metal sheet, shaped with an overlying or trapezoidal edge. Visochinata on the profile se selects the intended purpose and the necessary wearability.

Depending on the profiles, they can be used for facades, fences and cladding, but depending on the curves of the application, profiles are usually selected that are suitable for the specific slope and structural design.

Lamarina profiliran coating is suitable for:

• LCD;
• sheds and garages;
• warehouse;
• workers;
• selskostopanski sgradi;
• industry objects;
• construction assistance.

Contrary to the comparatively simple form, detail around the chelata, page the edges, beating and knead the treble and the badat of execution precisely.

Metal curved with retro panels

Retro panels are metal-clad with clear lines. Those have cleared up the vision with the installation in comparison with the traditional production of double folds.

This solution is suitable for buildings, forts, awnings and various architectural elements. Retro panels can be used to somehow bend the roof, and also behind the façade cladding.

Before installation, the surface was thoroughly checked and levelness checked. With a long slope, anything sagging or crooked can remain visible along the line for the finished coating.

With retro paneling, it is especially important to correctly design:

• the beginning and the edge are on the panel;
• jumping from the floor;
• biloto;
• page burgundy;
• sheath around the comini;
• jump up from your vision;
• Protect areas near snow elements.

Metal curved with click panel

The click panel is a factory-designed system, and when connected, the panels are connected through a specially profiled closing joint.

Visually, the system is similar to the folds, but the technology on the surface is different. Click panels are used in modern housing and public buildings, as well as behind façade cladding.

Suitable tilt and begin to prepare on the basis of testing and compliance with the technical instructions of the manufacturer.

It's not an automatic process, but every method is not suitable for any kind of click system. If the slope is low, the slope is long, or the parts are complex, another system may be damaged.

Metalen curved with double rebate

The double fold is a professional curved system; when you place the edges on a separate metal sheet, it will be formed and sealed mechanically.

When implemented correctly, the system is suitable for the complexities of the architectural solution, long slopes and curves, and at the same time there is a high level of reliability on the project.

The double fold is not a rip-off, but it's also a decorative covering. Toi iziskva spetsializirani machines, instruments and opitni meisteri.

Particular attention is paid to:

• preparation and flatness are based on;
• view of membrane under metal;
• move and move the element fasteners;
• possibility of thermal expansion;
• length on metal sheet;
• decorated on the strekhita and biloto;
• jump around Komini, Ulami and Bordove;
• installation on snow guards and photovoltaic systems.

When a long sheet is shaken, there will be a noticeable movement of metal when changing to temperature. Fixing it incorrectly can lead to deformation and stress in the coating.

How do you base the layer on the metal coating?

The exact structure depends on the distance, the sub-curve space is not inhabited, as it is seen in the design and what metal system is chosen.

Vapor barrier

The vapor barrier layer is supplied from the country's toplata to the vapor barrier layer. Negovat task and limit navlizaneto on water bets from the interior of the premises and the structure is curved.

Heat insulation

In habitable Tavan premises, thermal insulation is the key to energy efficiency and comfort. Debelinata and vidat ѝ tryabva yes badat determination of the project's scope.

Steam-permeable curved membrane

The membrane provides additional protection when penetrating water under extreme coverage and allows water to be removed from the structure.

Contraletvi

The contralet will form a ventilation channel between the membrane and the nasal scar. Through it, everything will move from the eaves to the visokata, often to the curve.

Wearing a scara or base

Metalite keremidi and profiliranat lamarina obiknovo se montirat varhu skara, dokato nyakoi folding system isiskvat platna, equal and stable base.

Extremely metallic coating

The extreme surface of the sloping surface is chosen according to the slope, architecture, length on the slope and the finish of the product.

Ventilation and protection against condensation with metal cover

One from the best place, ask the question and give under the metal, covering the whole, forming a condensation. Condensation may have appeared in any curved system, when the flood and humid air reached the icy surface.

The problem is not solved on its own through election to Lamarin. It is necessary to have a proper moisture control system in place.

Basic measurements include:

• vapor barrier is installed correctly;
• thermal insulation is sufficient and perfect;
• high-quality vapor-permeable membrane;
• ventilation kitchen under cover;
• entering air at the strechite;
• escaping into the air with a bile or viscosity point;
• do good for penetrating prez pokriva.

Because the air cannot move freely, the moisture can remain in the structure and the conditions for getting wet on the insulation and damaging the elements are created.

Is the metal curve noisy when it rains?

Nivoto on the noise depends on the curve of the system, and not on the extreme curve itself. Sheet metal, mounted directly on top of the structure without insulation, which may cause more noise.

When a home is built with properly installed thermal insulation, interior cladding, membranes and a stable base, noise is limited significantly.

When determining the folding system, you can use special structural or soundproofing membranes, which are additionally subject to vibration.

Is the metal cover rusty?

The quality of the lamarina is stomanen for the coating of the application and the protective zinc and polymer coating. These layers protect the base metal from atmospheric influence.

The risk from corrosion increases, however:

• the surface is scratched with an unsuitable tool;
• sheets of Ryazan with an abrasive disc;
• throw the shavings without cleaning them;
• All elements are crawling out of incompatible fasteners;
• vodata se zadarzha vurhu incorrectly made parts;
• the sheets were stored incorrectly before installation;
• The protective coating is not suitable for the environment.

Name:

Comment:

Send

See All News

Viber

Telegram

WhatsApp

Messenger

Write to mail

Request a call